LED luminaire with 180 ° emission (blade effect) for wall and ceiling installation, suitable for enhancing elevations and cladding materials, the minimal design allows integration with any type of architecture. Body made of anodized aluminum alloy and subsequently powder coated to provide high resistance to atmospheric agents and UV rays. Anti-UV silicone diffuser fixed by resin to the body of the device to allow water and dirt to flow out, avoiding the formation of deposits that would significantly reduce the performance of the device. Wall fixing system by means of an aluminum alloy plate treated and painted the same as the lamp body. Can be installed on any flat surface by anchoring. Stainless steel screws with a high molybdenum content. Annealed silicone sealing gaskets.
Source
LED Chip On Board (COB) technology.
Optics
Special optics with 180 ° opening (blade effect) made of anti-UV silicone.
Power supply
Electronic power supply integrated in the body of the fixture, available in the standard version (on-off). Power supply 220-240Vac 50 / 60Hz.
Note
Outgoing power cable with length L = 200mm in 2×0.75mm² neoprene. IP54 protection both on the product and on the cable using IP54 connectors. The product is not suitable for installation in swimming pools and fountains. We recommend the use of the SPD protection device, supplied by us upon request.
FAQ
Can it be placed outside?
The product can be installed outdoors, but it is necessary that the product and the connection system have an adequate IP protection rating.