LED linear profile for wall and ceiling installation using special brackets (supplied), suitable for illuminating elevations and facades, creating lighting effects of great value, useful for enhancing architecture. Body in extruded aluminum, with die-cast aluminum end caps complete with silicone gaskets. Acrylic paint with high resistance to atmospheric agents and UV rays. Optical compartment closed at the top by a tempered and silk-screened extra-clear glass screen (3mm thick) fixed by resin to avoid the formation of deposits that would significantly reduce the performance of the luminaire. Stainless steel screws with a high molybdenum content. Annealed silicone sealing gaskets.
Source
LED Chip On Board (COB) technology.
Optics
Roto-symmetrical optics available in various openings (see table opposite) treated by high vacuum metallization and protected by a tempered extra-clear safety glass screen.
Power supply
Electronic ballast not supplied. 24Vdc power supply.
Note
The product is supplied with a single cable gland and outgoing power cable with length L = 1000mm in 2×0.75mm² neoprene. IP67 protection both on the product and on the cable using IP67 connectors. Stainless steel installation supports provided.
Accessories
Electronic ballasts available in standard (on-off) and dimmable (DALI) versions, for single or multiple installations.
FAQ
Does the product require a power supply?
Yes, the lighting body requires a connection to the power supply, all protected from water ingress. The connection must have an IP rating greater than or equal to that indicated on the product. The power supply can be remote, evaluating its position with respect to the product together with us.
Can I connect multiple products to a single power supply?
During the estimate phase, the connection of one or more lighting fixtures to the power supply will be evaluated based on the arrangement in the room and the distance of the products from the driver. There are electronic power characteristics that must be evaluated by our technical office. Please request any information from your reference contact.
Does the product have set cable lengths?
The lighting body is supplied with standard cable lengths, but, for some products, different cable sizes may be required.
Can I request a particular color for this product?
During the estimate phase, the request will be evaluated following the RAL colors indicated by you.
The provision of a specific color also depends on the environment in which the lighting fixture will be positioned.
Can it be placed outside?
The product can be installed outdoors, but it is necessary that the product and the connection system have an adequate IP protection rating.