Linear LED profile for wall and ceiling installation using special brackets (supplied), suitable for illuminating elevations and facades creating light effects of great value, useful for enhancing architecture. Extruded aluminum body, with die-cast aluminum end caps complete with silicone gaskets. Acrylic paint with high resistance to atmospheric agents and UV rays. Optical compartment closed at the top by a screen in tempered and silk-screened extra-clear glass (3mm thick) fixed by means of resin to prevent the formation of deposits which would considerably reduce the performance of the luminaire. Screws in stainless steel with a high molybdenum content. Sealing gaskets in annealed silicone.
Source
Chip On Board (COB) LED technology.
Optics
Rotosymmetrical optics available in various apertures (see datasheet) treated with high vacuum metallization and protected by a screen in tempered extra-clear safety glass.
Power supply
Electronic driver integrated into the body of the luminaire, available in the standard version (on-off), or dimmable (DALI) or (PUSH-DIM). Power supply 220-240Vac 50/60Hz.
Note
The product is supplied with a single cable gland and an outgoing power supply cable L=1000mm in 2×0.75mm² neoprene. IP67 protection both on the product and on the cable using IP67 connectors. Supports for installation in stainless steel supplied. We recommend the use of the SPD protection device, supplied by us upon request.
FAQ
Can it be placed outside?
The product can be installed outdoors, but it is necessary that the product and the connection system have an adequate IP protection rating.
Can the brightness of the lamp be modulated?
To be able to use home dimming systems it is necessary to choose a compatible device and a power supply that allows dimming