The products of the Strip LINE 230V series allow architects and craftsmen to create lighting projects in internal and external environments, guaranteeing an elegant and minimal effect and enhancing architectural elements with light in an original and creative way without the problem of using power supplies. The Strip LINE 230V model is presented as a vertically flexible product with a minimum bending diameter of 50mm, completely made of silicone resin. Strip LINE does not yellow, is not subject to premature aging and overheating typical of classic LED strips. It can be ceiling-mounted using the clips supplied, recessed by gluing or using the aluminum profile supplied as an accessory.
Source
LED module with copper double-sided Kapton® PCB and gold-plated printed circuit boards.
Optics
Rotationally symmetrical emission protected by a layer of transparent resin.
Power supply
No electronic ballast, available in the standard version (on-off). Power supply 230Vac 50Hz.
Note
The product can be cut at intervals of 167mm, for the 14w/m version, and 100mm for the 17w/m version (see drawings alongside), available in different lengths up to 50m. Protect the power input with a fuse. The accessories and connectors are IP20 and make the strip IP20 in the case of cuts and joints.
Accessories
Clip for ceiling fixing, for the 14w/m version.
3M double-sided adhesive for fixing to profiles, for the 17w/m version.
Profile made of extruded aluminum complete with opal diffuser and closing caps for ceiling or suspension installation (using a specific kit).
Wired and non-wired closing caps, useful for feeding and closing divided parts of the product.
FAQ
Do all LED Strips need a power supply?
Not all LED Strips require a remote power supply; the 220/230 Vac type does not require a driver to be powered.
If I don't use all of the intended coil, can I reuse it in another environment?
The LED Strips can be cut along the dotted line on the product and the caps are supplied and, upon request, any restarts for other environments and the related power supplies.
How long can I get the product formwork to be able to install it on site?
The formwork is ready for delivery at the time of order.
Does the product require formwork?
Yes, for the correct installation of the product, we provide the formwork to be positioned during the construction phase. Where it is not possible to install the formwork, an alternative can be studied for the correct installation of the product.
Do you provide connectors for this product?
Yes, the product is supplied with the appropriate connectors it needs.
Can it be placed outside?
The product can be installed outdoors, but it is necessary that the product and the connection system have an adequate IP protection rating.