High quality IP65 LED strip, allows you to create lighting projects in indoor and outdoor environments, guaranteeing an elegant and minimal effect and exalting architectural elements with light in an original and creative way. The IP65 Strip LED model is presented as a horizontally flexible product with a minimum bending diameter of 50mm. Extremely uniform brightness (using recommended profiles). Strip LED IP65 is equipped with excellent quality LEDs, it is not subject to premature aging and overheating typical of classic LED strips. It can be installed on the ceiling by means of double-sided adhesive fixing or by inserting it into the recommended aluminum profiles.
Source
LED module with double-sided copper Kapton® PCB and gold-plated circuit boards, specially designed to ensure maximum efficiency.
Optics
Rotosymmetric emission (see datasheet) protected by a layer of transparent anti-yellowing resin.
Power supply
Electronic ballast not supplied. 24Vdc power supply.
Note
The product can be cut at intervals of 33mm (v.19W) or 50mm (v.14W) (see datasheet), the maximum feedable length is 5000mm.
Accessories
Electronic ballast, available in the standard version (on-off), dimmable.
Profiles of various types depending on the use (angular, recessed surface) made of extruded aluminum complete with opal diffuser and closing caps.
FAQ
If I don't use all of the intended coil, can I reuse it in another environment?
The LED Strips can be cut along the dotted line on the product. The installer will then have to connect the remaining segments on site.
Is it necessary to install a profile to contain the LED Strip?
It depends on the type of installation, the strip and the result you want to achieve. Generally speaking, it is however possible to insert the LED Strip within different types of profiles.
Does the product require a power supply?
Yes, the lighting body requires a connection to the power supply, all protected from water ingress. The connection must have an IP rating greater than or equal to that indicated on the product. The power supply can be remote, evaluating its position with respect to the product together with us.
Can I connect multiple products to a single power supply?
During the estimate phase, the connection of one or more lighting fixtures to the power supply will be evaluated based on the arrangement in the room and the distance of the products from the driver. There are electronic power characteristics that must be evaluated by our technical office. Please request any information from your reference contact.
How long can I get the product formwork to be able to install it on site?
The formwork is ready for delivery at the time of order.
Does the product require formwork?
Yes, for the correct installation of the product, we provide the formwork to be positioned during the construction phase. Where it is not possible to install the formwork, an alternative can be studied for the correct installation of the product.
