The products of the Strip LINE series allow architects and craftsmen to give life to lighting projects in internal and external environments, guaranteeing an elegant and minimal effect and exalting architectural elements with light in an original and creative way. The Strip LINE TOTAL RGB model is presented as a vertically flexible product with a minimum bending diameter of 50mm, completely made of polyurethane resin. Extremely uniform luminosity, without speckles, with a three-dimensional effect. Strip LINE does not turn yellow, is not subject to premature aging and overheating typical of classic LED strips. It can be installed on the ceiling using the clips supplied, recessed by gluing or using the aluminum profile supplied as an accessory.
Source
LED module with double-sided copper Kapton® PCB and gold-plated printed circuits, specially designed to guarantee maximum uniformity and the total absence of point light.
Optics
Rotosymmetric emission (see datasheet) protected by a layer of opal resin designed to reduce glare. The luminaire is suitable for installation in workplaces UGR<19 (EN12464-1).
Power supply
Electronic ballast not supplied. 24Vdc power supply.
Note
The product can be cut at intervals of 100mm (see datasheet), the maximum feed length is 5000mm.
Accessories
Electronic ballast, available in the standard version (on-off), dimmable version.
Steel clip for ceiling fixing.
Control unit for RGB led light sources.
Remote control for color control of RGB LED strips.
Profile made of extruded aluminum complete with opal diffuser and closing caps for recessed installation in masonry or plasterboard panels.
Wired and non-wired closure caps, useful for feeding and closing fractional parts of the product.
FAQ
If I don't use all of the intended coil, can I reuse it in another environment?
The LED Strips can be cut along the dotted line on the product and the caps are supplied and, upon request, any restarts for other environments and the related power supplies.
Does the product require a power supply?
Yes, the lighting body requires a connection to the power supply, all protected from water ingress. The connection must have an IP rating greater than or equal to that indicated on the product. The power supply can be remote, evaluating its position with respect to the product together with us.
Can I connect multiple products to a single power supply?
During the estimate phase, the connection of one or more lighting fixtures to the power supply will be evaluated based on the arrangement in the room and the distance of the products from the driver. There are electronic power characteristics that must be evaluated by our technical office. Please request any information from your reference contact.
How long can I get the product formwork to be able to install it on site?
The formwork is ready for delivery at the time of order.
Does the product require formwork?
Yes, for the correct installation of the product, we provide the formwork to be positioned during the construction phase. Where it is not possible to install the formwork, an alternative can be studied for the correct installation of the product.
Do you provide connectors for this product?
Yes, the product is supplied with the appropriate connectors it needs.