LED linear profile for wall and ceiling installation using special brackets, suitable for illuminating elevations and facades, creating light effects of great value, useful for enhancing architecture. Body in extruded anodized aluminum and subsequently powder coated to provide high resistance to atmospheric agents and UV rays, acts as a radiant surface and guarantees optimal heat dissipation. End caps in die-cast aluminum complete with silicone gaskets. Optical compartment closed at the top by a tempered and silk-screened extra-clear glass screen (5mm thick) fixed by resin to avoid the formation of deposits that would significantly reduce the performance of the luminaire. The projector can be adjusted in the vertical plane ± 90 ° by means of a painted steel bracket equipped with mechanical locks that guarantee stable aiming of the light beam. Stainless steel screws with a high molybdenum content.
Source
LED Chip On Board (COB) technology.
Optics
Roto-symmetrical optics available in various openings (see table opposite) treated by high vacuum metallization and protected by a tempered extra-clear safety glass screen.
Power supply
Electronic power supply integrated in the body of the fixture, available in the standard version (on-off). Power supply 220-240Vac 50 / 60Hz ..
Note
The product is supplied with a single cable gland and outgoing power supply cable L = 800mm in 2×0.75mm² neoprene. IP67 protection both on the product and on the cable using IP67 connectors. We recommend the use of the SPD protection device, supplied by us upon request.
FAQ
Can it be placed outside?
The product can be installed outdoors, but it is necessary that the product and the connection system have an adequate IP protection rating.