STUD Ortogonale
Apparecchio LED da incasso carrabile
Categories: Outdoor lighting, Urban and street lighting
Recessed lighting fixture, which can be installed on the floor using a special housing (available as an accessory). Particularly suitable for indoor or outdoor lighting of stairs, ramps and corridors. Main body in billet aluminum, acts as a radiant surface and guarantees optimal heat dissipation. Aluminum protective cap machined from solid and subsequently powder coated to provide high resistance to atmospheric agents and UV rays. The device is fixed to the appropriate formwork (see datasheet), by means of special retaining gaskets that allow it to be locked.
Source
LED Chip On Board (COB) technology.
Optics
Two-beam optics, horizontal and vertical.
Power supply
Electronic ballast not supplied. Power supply 3W @ 700mA 3V.
Note
Outgoing power cable with length L = 400mm in 2×0.75mm² neoprene. The correctly installed device guarantees resistance to a static load of 2000kg. IP67 protection both on the product and on the cable using IP67 connectors. The product is not suitable for installation in swimming pools and fountains. We recommend the use of the SPD protection device, supplied by us upon request.
Accessories
Electronic ballasts available in the standard version (on-off), for single or multiple installations. Formwork for masonry installation.
FAQ
How long can I get the product formwork to be able to install it on site?
The formwork is ready for delivery at the time of order.
Does the product require formwork?
Yes, for the correct installation of the product, we provide the formwork to be positioned during the construction phase.
Does the product require a power supply?
Yes, the lighting body requires a connection to the power supply, all protected from water ingress. The connection must have an IP rating greater than or equal to that indicated on the product. The power supply can be remote, evaluating its position with respect to the product together with us.
Can I connect multiple products to a single power supply?
During the estimate phase, the connection of one or more lighting fixtures to the power supply will be evaluated based on the arrangement in the room and the distance of the products from the driver. There are electronic power characteristics that must be evaluated by our technical office. Please request any information from your reference contact.
Does the product have set cable lengths?
The lighting body is supplied with standard cable lengths, but, for some products, different cable sizes may be required.
Can I request a particular color for this product?
During the estimate phase, the request will be evaluated following the RAL colors indicated by you.
The provision of a specific color also depends on the environment in which the lighting fixture will be positioned.