LED projector for wall, ceiling and floor installation using anchors, suitable for illuminating outdoor areas, gardens, parks and car parks. The optical compartments, the arm and the base are made of anodized aluminum alloy and subsequently powder painted to provide high resistance to atmospheric agents and UV rays, acts as a radiating surface and guarantees optimal heat dissipation. The projector can be adjusted in the vertical plane ±90° by means of a painted steel bracket equipped with mechanical blocks that guarantee stable aiming of the light beam. Extra-clear tempered protective front glass fixed by annealed silicone seals to avoid the formation of deposits which would significantly reduce the performance of the appliance. Stainless steel screws with a high molybdenum content. IP65 protection on both the product and the cable using IP65 connectors.
Source
LED Chip On Board (COB) 24Vdc technology.
Optics
Rotosymmetric optics available (see datasheet) treated by high vacuum metallization and protected by an extra-clear tempered protective glass screen.
Power supply
Electronic power supply external to the body of the luminaire, available in the standard version (on-off). Power supply 220-240Vac 50/60Hz.
Note
We recommend the use of the SPD protection device, supplied by us upon request.
FAQ
Can it be placed outside?
The product can be installed outdoors, but it is necessary that the product and the connection system have an adequate IP protection rating.