LED floodlight for ground installation (by means of a spike supplied) and wall (by anchoring), suitable for illuminating outdoor areas, gardens and car parks. Lamp body made of anodized aluminum alloy and subsequently powder coated to provide high resistance to atmospheric agents and UV rays, acts as a radiant surface and guarantees optimal heat dissipation. The projector can be adjusted in the vertical plane ± 90 ° by means of a painted steel bracket equipped with mechanical locks that guarantee stable aiming of the light beam. Extra-clear front protective glass (5mm thick) tempered and silk-screened, fixed by resin, in a coplanar position with the body of the appliance to allow dirt to drain, avoiding the formation of deposits that would significantly reduce the performance of the appliance. Stainless steel screws with a high molybdenum content. Annealed silicone sealing gaskets.
Source
LED Chip On Board (COB) technology.
Optics
Roto-symmetrical optics (see table opposite) treated by high vacuum metallization and protected by a tempered extra-clear safety glass screen fixed by resin.
Power supply
Electronic ballast integrated in the body of the fixture for the maxi version, 12-24 Vdc external power supply for Tobago, available in the standard version (on-off). Power supply 220-240Vac 50/60Hz.
Note
IP65 protection.
We recommend the use of the SPD protection device, supplied by us upon request.
FAQ
Does the product require a power supply?
Yes, the lighting body requires a connection to the power supply, all protected from water ingress. The connection must have an IP rating greater than or equal to that indicated on the product. The power supply can be remote, evaluating its position with respect to the product together with us.
Can I connect multiple products to a single power supply?
During the estimate phase, the connection of one or more lighting fixtures to the power supply will be evaluated based on the arrangement in the room and the distance of the products from the driver. There are electronic power characteristics that must be evaluated by our technical office. Please request any information from your reference contact.
Can it be placed outside?
The product can be installed outdoors, but it is necessary that the product and the connection system have an adequate IP protection rating.