LED projector for wall and floor installation using dowels, suitable for lighting outdoor areas, gardens, parks and car parks. The fixture is made of anodized aluminum alloy and subsequently powder coated to provide high resistance to atmospheric agents and UV rays, it acts as a radiating surface and guarantees excellent heat dissipation. The projector can be adjusted vertically by 90° by means of a painted steel bracket and fitted with mechanical blocks which guarantee stable pointing of the light beam and by 120° on the horizontal plane. Tempered opal protective front glass (thickness 5mm) fixed by annealed silicone sealing gaskets to prevent the formation of deposits which would significantly reduce the performance of the appliance. Screws in stainless steel with a high molybdenum content. Sealing gaskets in annealed silicone. IP67 protection both on the product and on the cable using IP67 connectors.
Source
Chip On Board (COB) LED technology.
Optics
Rotosymmetrical optics (see datasheet) treated by high vacuum metallization and protected by a tempered opal protective glass screen.
Power supply
Electronic ballast integrated in the body of the fixture, available in the standard version (on-off). Power supply 220-240Vac 50/60Hz.
Note
We recommend the use of the SPD protection device, supplied by us upon request.
FAQ
Can it be placed outside?
The product can be installed outdoors, but it is necessary that the product and the connection system have an adequate IP protection rating.