LED luminaire for wall installation, suitable for enhancing elevations and covering materials, the minimal design allows integration with any type of architecture. Body made of anodized aluminum alloy and subsequently powder coated to provide high resistance to atmospheric agents and UV rays. Diffuser in transparent tempered glass fixed by resin in a coplanar position to the body of the appliance to allow water and dirt to flow away, avoiding the formation of deposits which would significantly reduce the performance of the appliance. Wall fixing system using an aluminum alloy plate treated and painted in the same way as the lamp body. Can be installed on any flat surface by dowelling. Screws in stainless steel with a high molybdenum content. Sealing gaskets in annealed silicone.
Source
Chip On Board (COB) LED technology.
Optics
Rotosymmetrical optics (see datasheet) treated by high vacuum metallization and protected by a screen in tempered extra-clear safety glass fixed by means of resin.
Power supply
Electronic ballast integrated in the body of the fixture, available in the standard version (on-off). Power supply 220-240Vac 50/60Hz.
Note
IP65 protection both on the product and on the cable using IP65 connectors. We recommend the use of the SPD protection device, supplied by us upon request.
FAQ
Do you provide connectors for this product?
Yes, the product is supplied with the appropriate connectors it needs.
Can it be placed outside?
The product can be installed outdoors, but it is necessary that the product and the connection system have an adequate IP protection rating.