SAM

Adjustable LED projector for the lighting of fountains or monuments with a large presence of water, which can be installed using a special stainless steel bracket supplied. Frame and lamp body in AISI 316L steel with polished finish, the frame is fixed to the lamp body by means of stainless steel clamping screws. The projector can be adjusted in the vertical plane ± 90 ° by means of a painted steel bracket equipped with mechanical locks that guarantee stable aiming of the light beam. The horizontal aiming takes place through the holes and slots the bracket is supplied with. Optical compartment closed at the top by a tempered extra-clear glass screen (15mm thick) fixed by means of annealed silicone gaskets and coplanar to the luminaire body to allow easy cleaning.

Source
LED module specially designed to ensure maximum uniformity.

Optics
Roto-symmetrical optic treated by high vacuum metallization and protected by a tempered extra-clear safety glass screen.

Power supply
Electronic ballast (supplied as an accessory), available in the standard version (on-off). Power supply 220-240Vac 50 / 60Hz.

Note
Outgoing power cable 2×2,50mm², length L = 4000mm, completely non-toxic and suitable for contact with drinking water. IP68 protection both on the product and on the cable using IP68 connectors. Maximum length of the power cable: 19m for the 48W version, 38m for the 27W version.
We recommend the use of the SPD protection device, supplied by us upon request.

Accessories
Electronic ballasts available in the standard version (on-off), for single or multiple installations.