LED projector for wall and floor installation using plugs, suitable for lighting outdoor areas, gardens, parks and car parks. The optical compartment, the arm and the base are made of anodized aluminum alloy and subsequently powder coated to provide high resistance to atmospheric agents and UV rays, acts as a radiant surface and guarantees optimal heat dissipation. The projector can be adjusted in the vertical plane ± 90 ° by means of a painted steel bracket equipped with mechanical locks that guarantee stable aiming of the light beam. Tempered extra-clear front protective glass (5mm thick) fixed by sealing gaskets in annealed silicone to avoid the formation of deposits that would significantly reduce the performance of the appliance. Stainless steel screws with a high molybdenum content. IP67 protection both on the product and on the cable using IP67 connectors.
Source
LED Chip On Board (COB) technology.
Optics
Roto-symmetrical optics available in various openings (see table opposite) treated by high vacuum metallization and protected by a tempered extra-clear safety glass screen.
Power supply
Electronic power supply integrated in the body of the fixture, available in the standard version (on-off). Power supply 220-240Vac 50 / 60Hz.
Note
We recommend the use of the SPD protection device, supplied by us upon request.
FAQ
Can it be placed outside?
The product can be installed outdoors, but it is necessary that the product and the connection system have an adequate IP protection rating.