Recessed lighting fixture, which can be installed on the wall and floor using a special formwork (available as an accessory) or in the case of plasterboard installation using clips (supplied). Particularly suitable for indoor or outdoor lighting of stairs, ramps and corridors. Main body in billet aluminum, acts as a radiant surface and guarantees optimal heat dissipation. Round or square shaped frame, made of AISI 304 stainless steel. The fixture is fixed to the appropriate formwork (see drawings opposite), by means of special retaining gaskets that allow it to be locked.
Source
LED Chip On Board (COB) technology.
Power supply
Electronic ballast not supplied. Power supply 1W @ 350mA 3V, 2W @ 500mA 3V.
Note
Outgoing power cable with length L = 400mm in 2×0.75mm² neoprene. IP67 protection both on the product and on the cable using IP67 connectors. The product is not suitable for installation in swimming pools and fountains.
Accessories
Electronic ballasts available in standard (on-off) and dimmable (DALI) versions, for single or multiple installations. Formwork for masonry installation.
FAQ
Does the product require a power supply?
Yes, the lighting body requires a connection to the power supply, all protected from water ingress. The connection must have an IP rating greater than or equal to that indicated on the product. The power supply can be remote, evaluating its position with respect to the product together with us.
Can I connect multiple products to a single power supply?
During the estimate phase, the connection of one or more lighting fixtures to the power supply will be evaluated based on the arrangement in the room and the distance of the products from the driver. There are electronic power characteristics that must be evaluated by our technical office. Please request any information from your reference contact.
How long can I get the product formwork to be able to install it on site?
The formwork is ready for delivery at the time of order.
Does the product require formwork?
Yes, for the correct installation of the product, we provide the formwork to be positioned during the construction phase. Where it is not possible to install the formwork, an alternative can be studied for the correct installation of the product.
Does the product have set cable lengths?
The lighting body is supplied with standard cable lengths, but, for some products, different cable sizes may be required.
Can it be placed outside?
The product can be installed outdoors, but it is necessary that the product and the connection system have an adequate IP protection rating.